Soil Grades up to 74,997 ppm U3O8 (7.5%) at Portland Creek
Released
Released
Announcement PDF
ASX Announcement
Released 10 July 2024
Soil Grades up to 74,997 ppm U3O8
(7.5%) at Portland Creek
Re-assaying of 17 soil samples above laboratory limit of detection reveals outstanding
surface geochemistry
Highlights
Exceptionally high-grade uranium soil assays confirmed within the ~235m x 100 m
zone coincide with a historic radon gas anomaly. The zone remains open to the
east and west.
7 out of 17 soil samples re-assayed returned >3% U3O8
Over limit high-grade uranium soil assays:
IRA0022: 74,997 ppm U3O8
IRA0003: 20,695 ppm U3O8
IRA0023: 53,182 ppm U3O8
IRA0002: 18,454 ppm U3O8
IRA0011: 43,512 ppm U3O8
IRA0006: 17,747 ppm U3O8
IRA0004: 39,975 ppm U3O8
IRA0030: 17,688 ppm U3O8
IRA0024: 39,621 ppm U3O8
IRA0037: 17,452 ppm U3O8
IRA0031: 33,961 ppm U3O8
IRA0026: 14,327 ppm U3O8
IRA0027: 30,777 ppm U3O8
IRA0033: 13,974 ppm U3O8
IRA0012: 27,947 ppm U3O8
IRA0005: 12,441 ppm U3O8
IRA0001: 21,638 ppm U3O8
Results validate the initial soil assay results received, with all values exceeding the
previous limit of detection of >11,792 ppm U3O8, and confirms the soil
geochemistry results at Portland Creek as some of the highest recorded globally1
Geochemical pathfinder studies commenced to identify any vectors that may point
towards a primary uranium source proximal to the anomaly
Numerous large historical radon gas anomaly contours indicate the potential for
multiple areas of undercover uranium mineralisation to exist within the ~3.2km
radiometric corridor
UAV magnetic survey data processing underway to assess any structural controls
tied to the extraordinary soil geochemistry, with results expected in following
weeks
Infini Resources Limited
ABN 77 656 098 583
www.infiniresources.com.au
InfiniResources
1
Soil Grades up to 74,997 ppm U3O8 (7.5%) at Portland Creek
Infini Resources Ltd (ASX: I88, “Infini” or the “Company”) is delighted to announce soil assay results
from samples which previously returned in excess of the upper limit of detection from its maiden field
sampling campaign at its 100% owned Portland Creek Uranium Project. The Project is located in the
uranium-friendly jurisdiction of Newfoundland, Canada (Figure 1 and refer to ASX announcement 1 July
2024).
Infini’s CEO, Charles Armstrong said: “These follow-up assay results confirm that the Company has
encountered world class grades of uranium in soil samples at Portland Creek. I am not aware of any other
explorers that have returned results close to what we are seeing here in our maiden fieldwork program.
We now eagerly wait for processing of the UAV drone magnetic survey that was flown over Talus to see
what potential structural controls exist linked to this special anomaly.”
Figure 1 Inset map view of the high grade ~235m x 100m uranium soil anomaly at the Talus Prospect. NB: It
is interpreted that these two radon gas anomalies are connected. Historical surveys stopped where ground
conditions were problematic as evidenced by satellite imagery.
Infini Resources Limited
ABN 77 656 098 583
www.infiniresources.com.au
InfiniResources
2
Soil Grades up to 74,997 ppm U3O8 (7.5%) at Portland Creek
World Class Soil Sampling Results
The results of the follow up soil sample assays have now confirmed an outstanding peak assay result of
74,997 ppm U3O8 (Figures 1-2). These follow up assays are now even more significant given the average
background reading in soils is only ~8 ppm U3O8. This peak result is 9,375 times background. Infini is
now progressing its geochemical pathfinder studies to see if it can determine the primary bedrock source
of any potential uranium deposit sitting proximal or distal to the anomaly. The Company will update the
market as per its continuous disclosure obligations on any material advancements in this geochemical
work as it becomes available.
Figure 2 The Talus Uranium Prospect depicting the location of the incredibly high-grade soil samples. Note:
surface geochemistry is highly coincidental with the large existing anomalous radiometric corridor.
Upcoming Exploration Activities
Follow up exploration activities include a UAV geophysics structural interpretation, geochemical
pathfinder studies, and urgent fieldwork with an immediate focus on sampling radon gas anomalies at
Talus and any anomalous structures that have not been sampled. These activities will advance the
Company towards the definition of robust drill targets for testing with the aim of discovering a new uranium
deposit.
Infini Resources Limited
ABN 77 656 098 583
www.infiniresources.com.au
InfiniResources
3
Soil Grades up to 74,997 ppm U3O8 (7.5%) at Portland Creek
About Portland Creek Uranium Project
The Portland Creek Project covers an area of 149 km2 and is situated in the Precambrian Long-Range
Complex of the Humber Tectonic – Stratigraphic zone. These members include metaquartzite and a suite
of paragneisses, intruded by leucocratic pink granite, which have likely been thrust westwards over
Palaeozoic carbonate-dominant sediments. The Claims are situated over a large regional uranium
anomaly that was identified in the 1970’s by a Newfoundland government stream sediment sampling
program. There is one uranium showing on the property as listed in the Newfoundland Mineral Deposit
Index inventory with 2,180 ppm U3O8 (refer Prospectus dated 30 November 2023).
References
1 Uranium Exploration Case Histories. International Atomic Energy Agency (IAEA) Vienna, 1981.
[END]
Release authorised by the Board of Infini Resources Ltd.
Contacts
Charles Armstrong
Chief Executive Officer
P: +61 (08) 9465 1051
About Infini Resources Ltd (ASX: I88)
Infini Resources Ltd is an Australian energy metals company focused on mineral exploration in Canada
and Western Australia for uranium and lithium. The company has a diversified and highly prospective
portfolio of assets that includes greenfields and more advanced brownfields projects. The company’s
mission is to increase shareholder wealth through exploration growth and mine development.
JOR 2012 Mineral Resource Deposit
JORC 2012 Classification
Tonnes and Grade
Des Herbiers (U)
Inferred Combined Resource
162 Mt @ 123ppm U3O8
(43.95mlb)
Infini Resources Limited
ABN 77 656 098 583
www.infiniresources.com.au
InfiniResources
4
Soil Grades up to 74,997 ppm U3O8 (7.5%) at Portland Creek
Competent Person’s Statement
The information contained in this announcement that relates to exploration results for the Portland Creek Uranium Project is based
on, and fairly represents, information and supporting documentation prepared by Dr Andy Wilde, who is a fellow and registered
professional geoscientist (#10092) of the Australasian Institute of Geoscientists (AIG). Dr Wilde has sufficient experience that is
relevant to the style of mineralisation and type of deposit under consideration, and to the activity being undertaken to qualify as a
Competent Person, as defined in the JORC 2012 edition of the “Australasian Code for Reporting of Mineral Resources and Ore
Reserves”. Dr Wilde has 35 years’ experience and is a director and consultant Geologist for Infini Resources Ltd. Dr Wilde consents
to the inclusion in this report of the matters based on this information in the form and context in which they appear. Dr Wilde holds
securities in the Company
Compliance Statement
This report contains information on the Company’s Projects extracted from the Company’s Prospectus dated 30 November 2023
and released to the ASX market announcements platform on 10 January 2024, and announcements dated 15 January 2024, 29
January 2024, 19 February 2024, 29 February 2024 3 May 2024, 28 May 2024 and 1 July 2024 reported in accordance with the
2012 edition of the “Australian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves” (JORC Code).
The original market announcements are available to view on www.infiniresources.com.au and www.asx.com.au. The Company is
not aware of any new information or data that materially affects the information included in the original market announcement.
This report contains information regarding the Des Herbiers Mineral Resources Estimate extracted from the Company’s Prospectus
dated 30 November 2023 and released to the ASX market announcements platform on 10 January 2024, reported in accordance
with the 2012 edition of the “Australian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves” (JORC
Code). The Company confirms that it is not aware of any new information or data that materially affects the information included in
any original announcement and that all material assumptions and technical parameters underpinning the estimates in the original
market announcement continue to apply and have not materially changed. The original market announcements are available to
view on www.infiniresources.com.au and www.asx.com.au.
Forward Looking Statements
This announcement may contain certain forward-looking statements and projections. Such forward looking statements/projections
are estimates for discussion purposes only and should not be relied upon. Forward looking statements/projections are inherently
uncertain and may therefore differ materially from results ultimately achieved. Infini Resources Limited does not make any
representations and provides no warranties concerning the accuracy of the projections and disclaims any obligation to update or
revise any forward-looking statements/projects based on new information, future events or otherwise except to the extent required
by applicable laws. While the information contained in this report has been prepared in good faith, neither Infini Resources Limited
or any of its directors, officers, agents, employees or advisors give any representation or warranty, express or implied, as to the
fairness, accuracy, completeness or correctness of the information, opinions and conclusions contained in this announcement.
Infini Resources Limited
ABN 77 656 098 583
www.infiniresources.com.au
InfiniResources
5
Soil Grades up to 74,997 ppm U3O8 (7.5%) at Portland Creek
Appendix 1 – Current Exploration Results
Table 1: Recently completed over limit of detection assay results located within this
announcement. All survey sites are projected in NAD83 UTM Zone 21N.
Sample ID
Easting (m)
Northing (m)
U3O8 ppm
IRA0001
470755
5559545
21638
IRA0002
470755
5559530
18454
IRA0003
470751
5559522
20695
IRA0004
470738
5559499
39975
IRA0005
470744
5559483
12441
IRA0006
470740
5559476
17747
IRA0011
470715
5559513
43512
IRA0012
470706
5559503
27947
IRA0022
470753
5559543
74997
IRA0023
470754
5559540
53182
IRA0024
470716
5559443
39621
IRA0026
470714
5559519
14327
IRA0027
470732
5559509
30777
IRA0030
470711
5559459
17688
IRA0031
470694
5559481
33961
IRA0033
470738
5559553
13974
IRA0037
470731
5559610
17452
Infini Resources Limited
ABN 77 656 098 583
www.infiniresources.com.au
InfiniResources
6
Soil Grades up to 74,997 ppm U3O8 (7.5%) at Portland Creek
JORC Code, 2012 Edition – Table 1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
Sampling
techniques
JORC Code explanation
•
•
•
•
Infini Resources Limited
Commentary
Nature and quality of sampling (eg cut channels, random
chips, or specific specialised industry standard
measurement tools appropriate to the minerals under
investigation, such as down hole gamma sondes, or
handheld XRF instruments, etc). These examples should
not be taken as limiting the broad meaning of sampling.
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of mineralisation that are
Material to the Public Report.
In cases where ‘industry standard’ work has been done this
would be relatively simple (eg ‘reverse circulation drilling
was used to obtain 1 m samples from which 3 kg was
pulverised to produce a 30 g charge for fire assay’). In other
cases more explanation may be required, such as where
there is coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (eg
submarine nodules) may warrant disclosure of detailed
information.
ABN 77 656 098 583
•
•
Soil samples were collected by a professional team provided
by an experienced exploration contractor in Canada.
Individual sample locations were located with a handheld
Garmin GPS unit. At each location, a 300-500 g samples
were collected using a Dutch auger. Sampling equipment
was brushed or wiped clean using dirt from the sample site
before each sample was collected to eliminate any residue
from previous samples. The sampling targeted A-horizon
soil, directly below the organic/inorganic interface.
Information about soil sample characteristics and the
collection site were noted, including depth, drainage, slope,
colour, material, water content, vegetation, and topography.
Total count of radiation was tested and recorded for each
sample using an RS-125 Super Spec Handheld Gamma Ray
Spectrometer.
Soil samples were collected on a predetermined grid, spaced
50 m apart along parallel lines with a 100 m spacing. Outside
of this zone soil samples were spaced 100 m apart along
parallel lines with a 200 m spacing.
www.infiniresources.com.au
InfiniResources
7
Soil Grades up to 74,997 ppm U3O8 (7.5%) at Portland Creek
Criteria
JORC Code explanation
Commentary
•
•
•
•
Infini Resources Limited
ABN 77 656 098 583
Hand auger soil samples were collected in a similar manner
to soil samples. These targeted a specific local loam layer,
0 cm – 85 cm below the organic/inorganic interface.
Members of the team were trained to identify this layer and
check for its presence at a sample site. Samples were
collected at 12.5 m – 25 m spacing where the loam layer was
identified. Sample radiation levels were measured and
recorded with an RS-125 Super Spec Handheld Gamma Ray
Spectrometer.
Soil samples and hand auger soil samples were submitted
to ALS Geochemical Laboratories’ prep lab in Moncton, NB,
Canada for analysis using the ME-MS41L and MS41L-PbIS
protocols. Any soil samples that exceeded the limit of
detection (LOD) were follow up assayed with the U-XRF15b
ore grade protocol which has a 51% U LOD.
Spectrometer traverse readings were taken using a
calibrated and GPS enabled RS-125 Super-SPEC Handheld
Gamma Ray Spectrometer. The survey mode of operation
was used to collect traverse data.
Biogeochemical samples were collected by a professional
team provided by an experienced exploration contractor in
Canada, on the same grid as the soil samples. Sample sites
were located with a handheld Garmin GPS unit. At each
location, a sample of 250g was collected from 2 or more
trees using pruning shears. Samples targeted 7 years of
growth, including new growth and consisted of branches with
needles included taken at 1.3 m off the ground. Data
recorded for each sample included the number of trees
sampled, the area of ground containing the trees sampled,
the type of tree, ground conditions, evidence of stressed
growth or soil contamination.
www.infiniresources.com.au
InfiniResources
8
Soil Grades up to 74,997 ppm U3O8 (7.5%) at Portland Creek
Criteria
JORC Code explanation
Commentary
•
•
•
Biogeochemical samples were submitted to ALS
Laboratories’ Moncton for analysis using the ME-VEG41a
protocol.
Rock grab samples were collected by the field team where
geology of interest was encountered; samples of 200-1000
g were collected. Locations, photos, and descriptions of the
samples were recorded.
Rock samples were submitted to ALS Laboratories Moncton
for analysis using the ME-MS81d protocol.
Drilling
techniques
•
Drill type (eg core, reverse circulation, open-hole hammer,
rotary air blast, auger, Bangka, sonic, etc) and details (eg
core diameter, triple or standard tube, depth of diamond
tails, face-sampling bit or other type, whether core is
oriented and if so, by what method, etc).
•
Not applicable due to no drilling undertaken.
Drill sample
recovery
•
Method of recording and assessing core and chip sample
recoveries and results assessed.
Measures taken to maximise sample recovery and ensure
representative nature of the samples.
Whether a relationship exists between sample recovery and
grade and whether sample bias may have occurred due to
preferential loss/gain of fine/coarse material.
•
Not applicable due to no drilling undertaken.
Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support
appropriate Mineral Resource estimation, mining studies
and metallurgical studies.
Whether logging is qualitative or quantitative in nature.
Core (or costean, channel, etc) photography.
The total length and percentage of the relevant
intersections logged.
•
Not applicable due to no drilling undertaken.
•
•
Logging
•
•
•
Infini Resources Limited
ABN 77 656 098 583
www.infiniresources.com.au
InfiniResources
9
Soil Grades up to 74,997 ppm U3O8 (7.5%) at Portland Creek
Criteria
Sub-sampling
techniques
and sample
preparation
JORC Code explanation
•
•
•
•
•
•
Infini Resources Limited
Commentary
If core, whether cut or sawn and whether quarter, half or all
core taken.
If non-core, whether riffled, tube sampled, rotary split, etc
and whether sampled wet or dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation technique.
Quality control procedures adopted for all sub-sampling
stages to maximise representivity of samples.
Measures taken to ensure that the sampling is
representative of the in situ material collected, including for
instance results for field duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain size of
the material being sampled.
ABN 77 656 098 583
•
Not applicable due to no drilling undertaken.
www.infiniresources.com.au
InfiniResources
10
Soil Grades up to 74,997 ppm U3O8 (7.5%) at Portland Creek
Quality of
assay data
and laboratory
tests
•
•
•
The nature, quality and appropriateness of the assaying
and laboratory procedures used and whether the technique
is considered partial or total.
For geophysical tools, spectrometers, handheld XRF
instruments, etc, the parameters used in determining the
analysis including instrument make and model, reading
times, calibrations factors applied and their derivation, etc.
Nature of quality control procedures adopted (eg standards,
blanks, duplicates, external laboratory checks) and whether
acceptable levels of accuracy (ie lack of bias) and precision
have been established.
•
•
•
•
•
•
Infini Resources Limited
ABN 77 656 098 583
Soil Samples
Assay techniques are ME-MS41L and MS41L-PbIS which
are a ‘Total Technique’ for uranium exploration. Super trace
aqua regia and four acid-digestions are ideal for soil and
sediment samples where background values improve
anomaly identification. The Pb Isotope add-on is useful for
pathfinder purposes when attempting to vector in on
undercover uranium mineralisation.
Biogeochemical Samples
Assay technique is ME-VEG41a which is an appropriate
‘Total Technique’ for undercover uranium exploration. After
ashing this technique uses an aqua regia digest to produce
50+ elements that are reported with the industry’s lowest
detection levels.
Rock Samples
Assay technique is ME-MS81d which is an appropriate ‘Total
Technique’ for uranium exploration. The lithium borate fusion
prior to acid dissolution and ICP-MS analysis provides the
most quantitative analytical approach for a broad suite of
trace elements in rock samples.
Standard laboratory QAQC is undertaken and monitored by
the laboratory and by the company upon assay result
receival.
Soil sampling QAQC was performed in the field by flushing
the sampling equipment clean with soil from the sample site
before being collected to eliminate any residue from
previous samples. Duplicate samples were taken to
maintain 5-10% QAQC. This was performed by taking a
second sample from the same site but from a different hole.
Biogeochemical sampling QAQC was performed by
maintaining duplicate samples at 5-10% where a second
set of spruce branches and needles were taken from the
same sample site at a different side of the tree.
www.infiniresources.com.au
InfiniResources
11
Soil Grades up to 74,997 ppm U3O8 (7.5%) at Portland Creek
Criteria
Verification of
sampling and
assaying
JORC Code explanation
•
•
•
•
Location of
data points
•
•
•
Data spacing
and
distribution
•
•
•
Commentary
The verification of significant intersections by either
independent or alternative company personnel.
The use of twinned holes.
Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic)
protocols.
Discuss any adjustment to assay data.
•
Where appropriate the company has converted original ppm
U assay data to ppm U3O8 using the conversion factor of
1.1792.
Accuracy and quality of surveys used to locate drill holes
(collar and down-hole surveys), trenches, mine workings
and other locations used in Mineral Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
•
•
All sample location data is in NAD83 UTM Zone 21N.
Soil samples, biogeochemical samples and spectrometer
traverse sites were surveyed by a handheld GARMIN GPS
with an accuracy of +/- 3m.
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is sufficient to
establish the degree of geological and grade continuity
appropriate for the Mineral Resource and Ore Reserve
estimation procedure(s) and classifications applied.
Whether sample compositing has been applied.
•
Soil and biogeochemical samples were collected on a
predetermined grid, spaced 50 m apart along parallel lines
with a 100 m spacing. Outside of this zone soil samples
were mostly spaced 100 m apart along parallel lines with a
200 m spacing. This is considered appropriate at this stage
of exploration where radiometric anomalism already exists
warranting more targeted and tighter spacing of sample
sites.
Not applicable as no Mineral Resource and Ore Reserves
are reported.
No sample compositing has been applied.
•
•
Orientation of
data in relation
to geological
structure
Infini Resources Limited
•
•
Whether the orientation of sampling achieves unbiased
sampling of possible structures and the extent to which this
is known, considering the deposit type.
If the relationship between the drilling orientation and the
orientation of key mineralised structures is considered to
have introduced a sampling bias, this should be assessed
and reported if material.
ABN 77 656 098 583
•
The soil, biogeochemical sampling and spectrometer
traverse data was undertaken across and through the strike
of known radiometric anomalism within the project areas.
www.infiniresources.com.au
InfiniResources
12
Soil Grades up to 74,997 ppm U3O8 (7.5%) at Portland Creek
Criteria
JORC Code explanation
Commentary
Sample
security
•
The measures taken to ensure sample security.
•
Field samples were collated by field staff who freighted the
samples to ALS Moncton, NB, Canada for rush order
analysis.
Audits or
reviews
•
The results of any audits or reviews of sampling techniques
and data.
•
None carried out to date.
Infini Resources Limited
ABN 77 656 098 583
www.infiniresources.com.au
InfiniResources
13
Soil Grades up to 74,997 ppm U3O8 (7.5%) at Portland Creek
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
Mineral
tenement and
land tenure
status
JORC Code explanation
•
•
Exploration
done by other
parties
•
Commentary
Type, reference name/number, location and ownership
including agreements or material issues with third parties
such as joint ventures, partnerships, overriding royalties,
native title interests, historical sites, wilderness or national
park and environmental settings.
The security of the tenure held at the time of reporting
along with any known impediments to obtaining a licence to
operate in the area.
•
•
Acknowledgment and appraisal of exploration by other
parties.
•
•
•
•
Infini Resources Limited
ABN 77 656 098 583
The Talus prospect is located on 036683M and 036684M.
The Portland Creek uranium project comprises seven
mineral claims (036683M, 036684M, 036685M, 037492M,
037490M, 037496M and 037495M). The company staked
the project in 2023/24 (100% ownership) and is not aware of
any royalties existing on the claims or impediments to
obtaining a license to operate in the area.
The claims are currently live and in good standing.
Exploration between 1976 and 1980 was carried out by the
Conwest Canadian Uranium Exploration JV. Work included
radon gas sampling, a scintillometer survey, and VLF-EM
and ground magnetics. Follow-up drilling using a portable
“Pionjar” drill capable of drilling to 8 m depth which identified
a small, high grade uranium anomaly (so-called “loam
deposit”). Only very sparse details survive on this drilling
program with no assay results or drill hole locational data
able to be verified under the JORC code. Five diamond holes
were drilled. Partial results have been found for only one of
these, which reported unmineralized granite.
Subsequent exploration in 2007 included Ucore flying an
airborne IMPULSE survey and collecting 8 rock samples and
in 2009, Novtem Airborne Geophysics flew a magnetic
survey. The property was abandoned shortly after.
Current modern exploration is now being undertaken
thoroughly by Infini Resources and includes soil,
biogeochemical, spectrometer, LiDAR and UAV magnetic
surveys in addition to geological mapping with rock
sampling.
www.infiniresources.com.au
InfiniResources
14
Soil Grades up to 74,997 ppm U3O8 (7.5%) at Portland Creek
Criteria
Geology
JORC Code explanation
•
Commentary
Deposit type, geological setting and style of mineralisation.
•
•
Drill hole
Information
•
•
•
•
•
•
•
Data
aggregation
methods
Infini Resources Limited
•
The target uranium deposit type is not well understood at this
early stage of exploration but could include high grade
unconformity type (e.g. Cigar and Mclean Lake in
Saskatchewan), alaskite type (e.g. Rossing, Husab in
Namibia) and structurally controlled albitite type (aka shear
zone hosted).
Infini’s claims straddle an inferred thrust contact between
middle Proterozoic granitoid suites and Ordovician
carbonate dominant rocks. The granites are known to be
anomalously radioactive, in part due to high Th content.
A summary of all information material to the understanding
of the exploration results including a tabulation of the
following information for all Material drill holes:
easting and northing of the drill hole collar
elevation or RL (Reduced Level – elevation above sea level
in metres) of the drill hole collar
dip and azimuth of the hole
down hole length and interception depth
hole length.
If the exclusion of this information is justified on the basis
that the information is not Material and this exclusion does
not detract from the understanding of the report, the
Competent Person should clearly explain why this is the
case.
•
Incomplete details of previous drilling are available, and
locations and results of most holes drilled by the Conwest JV
are completely unknown. The limited historical exploration
records that exist over the project are publicly available in the
Government of Newfoundland’s GeoScience OnLine system
under the report IDs: 012I/03/0125 and NFLD/3082.
In reporting Exploration Results, weighting averaging
techniques, maximum and/or minimum grade truncations
(eg cutting of high grades) and cut-off grades are usually
Material and should be stated.
•
Not applicable due to no drilling undertaken.
ABN 77 656 098 583
www.infiniresources.com.au
InfiniResources
15
Soil Grades up to 74,997 ppm U3O8 (7.5%) at Portland Creek
Criteria
JORC Code explanation
•
•
Relationship
between
mineralisation
widths and
intercept
lengths
•
•
•
Commentary
Where aggregate intercepts incorporate short lengths of
high grade results and longer lengths of low grade results,
the procedure used for such aggregation should be stated
and some typical examples of such aggregations should be
shown in detail.
The assumptions used for any reporting of metal equivalent
values should be clearly stated.
These relationships are particularly important in the
reporting of Exploration Results.
If the geometry of the mineralisation with respect to the drill
hole angle is known, its nature should be reported.
If it is not known and only the down hole lengths are
reported, there should be a clear statement to this effect
(eg ‘down hole length, true width not known’).
•
Not applicable due to no drilling undertaken.
Diagrams
•
Appropriate maps and sections (with scales) and
tabulations of intercepts should be included for any
significant discovery being reported These should include,
but not be limited to a plan view of drill hole collar locations
and appropriate sectional views.
•
Appropriate diagrams are included in the main body of this
report. No significant discovery is being reported.
Balanced
reporting
•
Where comprehensive reporting of all Exploration Results
is not practicable, representative reporting of both low and
high grades and/or widths should be practiced to avoid
misleading reporting of Exploration Results.
•
Reporting of all geochemical results is considered balanced
with results of both low and high analytes reported. Assay
results reported do not include the company’s internal QAQC
samples taken as per industry standards practices.
Other
substantive
exploration
data
•
Other exploration data, if meaningful and material, should
be reported including (but not limited to): geological
observations; geophysical survey results; geochemical
survey results; bulk samples – size and method of
treatment; metallu
Share your feedback
Discover