Infini Expands Strategic Footprint at Portland Creek by 68%
Released
Released
Announcement PDF
ASX Announcement
Released 13 October 2025
Infini Resources Limited ABN 77 656 098 583 www.infiniresources.com.au
InfiniResources
1
Infini Expands Strategic Footprint at
Portland Creek by 68%
Strategic expansion of Portland Creek Project area by 10,250 hectares through
staking applications of 410 additional mineral claims, increasing Infini’s total
landholding in Newfoundland to over 25,000 hectares.
All four newly staked areas are contiguous to Infini’s existing mineral claims where
the Company is targeting the discovery of new economic uranium deposits.
Expansion consolidates Infini’s dominant footprint across one of Canada’s most
prospective emerging uranium districts, securing possible extensions of east–
west trending mineralised structures confirmed in recent drilling.
Recent Phase 2 drilling returned widespread elevated uranium (U) readings across
multiple zones based on spot pXRF1
, with visible uraninite along joint surfaces in
PCDD25-012 at 270.0m and at 289.0m, recording 1.2% and 1.17% U (pXRF1
),
respectively, within intensely altered granites.
High-grade molybdenum intersected up to 2.38% Mo (pXRF1
) within a 4 m albatised
granite interval in PCDD25-009A indicative of a fertile polymetallic hydrothermal
system.
Phase 2 drilling is ongoing with plans underway to expand the minimum 2,500m
program to efficiently and effectively test high priority U targets. First assay results
from the Phase 2 drilling program expected in Q4 CY2025.
Infini Resources Ltd (ASX: I88, “Infini” or the “Company”) is pleased to announce that it has
expanded its strategic landholding around the Portland Creek Uranium Project, Newfoundland, Canada,
through staking applications of 410 additional mineral claims totalling 10,250 hectares.
The new claims were staked to expand and secure possible extensions of mineralised structures and
prospective host lithologies identified during recent exploration.
Collectively, the staking increases Infini’s landholding in Newfoundland to over 25,000 hectares, further
strengthening Infini’s interests in the Portland Creek region and positioning the Company for future growth
opportunities in light of recent exploration activities to demonstrate the scale and fertility of a potential
district-scale polymetallic uranium and critical minerals system.
Infini’s Chief Executive Officer, Rohan Bone, said: " This is a strategic expansion for Infini at a pivotal
time. Following the breakthrough of visible uraninite and high-grade molybdenum at Portland Creek, it
was essential that we consolidate our position across this highly prospective district. These new
tenements strengthen our geological footprint, secure potential extensions of known structures, and
1 Refer announcement 9 October 2025. Cautionary Statement: Portable XRF (pXRF) readings cited in this release are qualitative
spot measurements and should not be considered equivalent to laboratory assay results. pXRF values are subject to variability
due to sample heterogeneity, surface effects and instrument limitations. They are intended only as an indication of elemental
presence and relative abundance and are not representative of bulk grade or mineralisation. Definitive results will be confirmed
through laboratory assays.
Infini Expands Strategic Footprint at Portland Creek by 68%
Infini Resources Limited ABN 77 656 098 583 www.infiniresources.com.au
InfiniResources
2
provide the foundation for long-term exploration and development. We’re building scale and optionality in
one of the most supportive jurisdictions for uranium exploration globally.”
Next steps
Integration will be undertaken of all available geological, airborne geophysical and remote sensing
datasets across the newly staked tenements in order to define priority target areas. This work will
complement the ongoing Phase 2 drilling program, which continues to target widespread uranium and
polymetallic mineralisation at the Falls Lake Prospect.
Figure 1: Infini’s footprint at the Portland Creek Uranium Project strategically increased by 10,250 hectares
covering potential extensions of known structures and prospective host lithologies.
Infini Expands Strategic Footprint at Portland Creek by 68%
Infini Resources Limited ABN 77 656 098 583 www.infiniresources.com.au
InfiniResources
3
Cautionary Statement
The Company has defined the mineralisation in the field by using hand held pXRF technology to analyse
drill samples in real time. This allows for immediate on-site decisions to be made to adjust drilling
strategies.
While pXRF readings provide a useful indication of elemental content and approximate grades, they are
not a substitute for laboratory-derived assay grades. All drill intercepts will be sent to an independent
laboratory for accurate analysis, with assay results expected in the current quarter. Laboratory assays
will be provided when these become available.
Limitations of the pXRF technique include; very small analysis window, possible inhomogeneous
distribution of mineralisation, analytical penetration depth and from the impact of irregular rock surfaces.
Results are not considered to be entirely representative of the rock samples, as the analyses were made
of what were interpreted to be areas on drill samples with potential to be uranium. The analyses were
carried out on drill core specimens and not ground powders. The pXRF performance is checked
periodically against certified reference material. The samples that are the subject of this report will be
submitted for laboratory assay and some variation from the results presented herein should be expected.
Caution should be exercised until the official assay laboratory results have been received.
While these preliminary results provide evidence of mineralisation, the Company notes that assay
confirmation remains pending and further exploration is required to determine the continuity and thickness
of mineralised zones, which will be critical in defining the economic potential of the mineralisation.
References
1. ASX Release, Infini Resources, Phase 2 Drilling at Portland Creek Set to Unlock High-Grade
Uranium Targets, 28th July 2025.
2. ASX Release, Infini Resources, Extensive Downhole Uranium Intersected at Portland Creek, 9th
October 2025.
[END]
Release authorised by the Board of Infini Resources Ltd.
Contacts
Rohan Bone
Chief Executive Officer
E: info@infiniresources.com.au
Infini Expands Strategic Footprint at Portland Creek by 68%
Infini Resources Limited ABN 77 656 098 583 www.infiniresources.com.au
InfiniResources
4
About Portland Creek Uranium Project
The Portland Creek Uranium Project spans 251 km² and lies within the Precambrian Long-Range
Complex of the Humber Tectonic-Stratigraphic Zone. The geology consists of metaquartzite and a suite
of paragneisses, intruded by leucocratic granite, which are believed to have been thrust westward over
Paleozoic carbonate-dominant sediments.
The project area covers a large regional uranium anomaly, first identified in the 1970’s through a
Newfoundland government lake sediment sampling program. Originally, one uranium showing was
recorded in the Newfoundland Mineral Deposit Index, reporting 2,180 ppm U₃O₈. A compilation of historic
and recent exploration data has since delineated a 6 km zone of anomalous uranium and radon gas in
lake sediments, soils and in an airborne radiometric survey. This anomaly closely follows a prominent
fault scarp, marking the edge of a granitic plateau interpreted as a deep-seated fault.
Since listing, the Company has verified historical uranium anomalies and completed a soil sampling grid
over the Falls Lake Prospect (formerly the Talus Prospect). This work defined a ~800 m x 100 m high-
grade uranium anomaly, with a peak result of 74,997 ppm U₃O₈. This anomaly is located down-ice and
west of a 1.5 km radiometric anomaly. Additionally, Infini has identified a southern 500 m-wide cluster of
high-grade soil samples, which includes a peak of 1,500 ppm U₃O₈ and lies 1.5 km from the recently
completed Phase 1 drill program.
Figure 2: Overview of prospective exploration areas at Portland Creek, demonstrating the occurrence of soil
sampling grades up to 74,997 ppm U₃O₈, anomalous radiometric data and Infini’s package of tenements.
Infini Expands Strategic Footprint at Portland Creek by 68%
Infini Resources Limited ABN 77 656 098 583 www.infiniresources.com.au
InfiniResources
5
About Infini Resources Ltd (ASX: I88)
Infini Resources Ltd is an Australian energy metals company focused on mineral exploration in Canada and Western Australia for
uranium and lithium. The company has a diversified and highly prospective portfolio of assets that includes greenfield and more
advanced brownfield projects. The company’s mission is to increase shareholder wealth through exploration growth and mine
development.
JORC 2012 Mineral Resource Deposit JORC 2012 Classification Tonnes and Grade
Des Herbiers (U) Inferred Combined Resource 162 Mt @ 123ppm U3O8 (43.95mlb)
Figure 3: Overview of Infini's portfolio of projects and global footprint.
Competent Person & Compliance Statement
The information in this report that relates to exploration results for the Portland Creek Project is based on, and fairly represents,
information and supporting documentation compiled and evaluated by Mark Couzens, Principal Geologist for the Company who is
a Member of the AusIMM. Mr. Couzens has sufficient experience relevant to the style of mineralisation, type of deposit under
consideration, and the activity being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the Australian
Code for Reporting of Exploration Results, Mineral Resources, and Ore Reserves (JORC Code). Mr. Couzens consents to the
inclusion of the information in the form and context in which it appears. The information in the market announcement is an accurate
representation of the available data and studies for the Portland Creek Project.
This announcement contains information on the Portland Creek Project extracted from ASX market announcements dated 10
January 2024, 15 January 2024, 29 January 2024, 19 February 2024, 28 May 2024, 1 July 2024, 10 July 2024, 22 July 2024, 14
October 2024, 23 December 2024, 26 March 2025, 4 July 2025, 14 July 2025, 28 July 2025, 30 July 2025, 3 September 2025, 11
September 2025 and 9 October 2025 reported in accordance with the 2012 edition of the “Australian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves” (JORC Code). The original market announcements are available to
view on www.infiniresources.com.au and www.asx.com.au. The Company is not aware of any new information or data that
materially affects the information included in the original market announcement.
This report contains information regarding the Des Herbiers Mineral Resources Estimate extracted from the Company’s Prospectus
dated 30 November 2023 and released to the ASX market announcements platform on 10 January 2024, reported in accordance
with the 2012 edition of the “Australian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves” (JORC
Code). The Company confirms that it is not aware of any new information or data that materially affects the information included in
any original announcement and that all material assumptions and technical parameters underpinning the estimates in the original
market announcement continue to apply and have not materially changed. The original market announcements are available to
view on www.infiniresources.com.au and www.asx.com.au.
Forward Looking Statements
This announcement may contain certain forward-looking statements and projections. Such forward looking statements/projections
are estimates for discussion purposes only and should not be relied upon. Forward looking statements/projections are inherently
uncertain and may therefore differ materially from results ultimately achieved. Infini Resources Limited does not make any
representations and provides no warranties concerning the accuracy of the projections and disclaims any obligation to update or
revise any forward-looking statements/projects based on new information, future events or otherwise except to the extent required
by applicable laws. While the information contained in this report has been prepared in good faith, neither Infini Resources Limited
or any of its directors, officers, agents, employees or advisors give any representation or warranty, express or implied, as to the
fairness, accuracy, completeness or correctness of the information, opinions and conclusions contained in this announcement
Infini Expands Strategic Footprint at Portland Creek by 68%
Infini Resources Limited ABN 77 656 098 583 www.infiniresources.com.au
InfiniResources
6
Appendix 1: Overview of Infini’s footprint at the Portland Creek
Uranium Project
Table 1: Overview of the Infini’s tenements staked at the Portland Creek Uranium Project.
Licence ID Issue Date # Claims Hectares
036683M 27-Oct-2023 138 3,450
036684M 27-Oct-2023 150 3,750
037490M 14-Mar-2024 81 2,025
037492M 14-Mar-2024 49 1,225
036685M 3-Nov-2023 144 3,600
037495M 14-Mar-2024 7 175
037496M 14-Mar-2024 29 725
039752M In progress 76 1,900
039753M In progress 114 2,850
039754M In progress 160 4,000
039755M In progress 60 1500
Total -- 1,008 25,200
Infini Expands Strategic Footprint at Portland Creek by 68%
Infini Resources Limited ABN 77 656 098 583 www.infiniresources.com.au
InfiniResources
7
JORC Code, 2012 Edition – Table 1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria JORC Code explanation Commentary
Sampling
techniques
• Nature and quality of sampling (eg cut channels, random
chips, or specific specialised industry standard
measurement tools appropriate to the minerals under
investigation, such as down hole gamma sondes, or
handheld XRF instruments, etc). These examples should
not be taken as limiting the broad meaning of sampling.
• Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
• Aspects of the determination of mineralisation that are
Material to the Public Report.
• In cases where ‘industry standard’ work has been done this
would be relatively simple (e.g. ‘reverse circulation drilling
was used to obtain 1 m samples from which 3 kg was
pulverised to produce a 30 g charge for fire assay’). In other
cases more explanation may be required, such as where
there is coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (e.g.
submarine nodules) may warrant disclosure of detailed
information.
• Details of Infini’s soil sampling and historic lake sediment
sampling have been reported previously (ASX 1st July 2024
& 10th July 2024).
• Details of Infini’s sampling of drill core during the Phase 2
drilling program have been reported previously (ASX 9th
October 2025).
• Drill core was tested using a RS-125 scintillometer over each
tray of core to get a representative value for the amount of
radiation it contains. Random high scintillometer values were
then tested using a portable XL3t gold+ XRF device set on
Test All Geo mode (60 second duration) to confirm the tenor
of any uranium mineralisation detected and to confirm that it
is in fact uranium and not other radioactive elements such as
thorium.
• When high values for uranium were obtained two further
XRF checks were done in this general area to confirm the
grades detected and an average was recorded. Not all high
uranium values have been recorded with the highest value
for a given core tray was often used as a representative
number.
• Core was also analysed using a portable XRF (pXRF) at
every meter marker. Where spot mineralisation exceeds
200 ppm the core is tested at 25 cm spacing in the
preceding and following meter of core.
Infini Expands Strategic Footprint at Portland Creek by 68%
Infini Resources Limited ABN 77 656 098 583 www.infiniresources.com.au
InfiniResources
8
Criteria JORC Code explanation Commentary
Drilling
techniques
• Drill type (e.g. core, reverse circulation, open-hole hammer,
rotary air blast, auger, Bangka, sonic, etc.) and details (e.g.
core diameter, triple or standard tube, depth of diamond
tails, face-sampling bit or other type, whether core is
oriented and if so, by what method, etc.).
• Details of Infini’s drilling have been reported previously (ASX
28th July 2025, 30th July 2025, 3rd September 2025 & 9th
October 2025).
• Drilling is undertaken by one heli-transportable diamond
drill rig. The core is NG gauge on a single 10m core tube.
The core is oriented with a ACT III RD tool.
Drill sample
recovery
• Method of recording and assessing core and chip sample
recoveries and results assessed.
• Measures taken to maximise sample recovery and ensure
representative nature of the samples.
• Whether a relationship exists between sample recovery and
grade and whether sample bias may have occurred due to
preferential loss/gain of fine/coarse material.
• Core recovery is based on depths assigned by the drillers
and measurement of core for that interval by Infini’s
contractors and recorded in a spreadsheet.
• Recovery is generally better than 95%, so no special
measures are required. In areas with lower recovery, core
loss was assigned to the intervals with broken and faulted
core.
• No relationship between sample recovery and grade was
established.
Logging • Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support
appropriate Mineral Resource estimation, mining studies
and metallurgical studies.
• Whether logging is qualitative or quantitative in nature.
Core (or costean, channel, etc) photography.
• The total length and percentage of the relevant
intersections logged.
• Core is being visually logged, which is qualitative in nature.
• All core is photographed and the imagery imported into an
online database (Imago)
• Each hole is logged in its entirety
Sub-sampling
techniques
and sample
preparation
• If core, whether cut or sawn and whether quarter, half or all
core taken.
• If non-core, whether riffled, tube sampled, rotary split, etc
and whether sampled wet or dry.
• For all sample types, the nature, quality and
appropriateness of the sample preparation technique.
• Core samples are cut in half with a core splitter.
• Each sample interval consists of one half of the cut NQ drill
core.
• Each sample is bagged with a numbered tag. Prep-31 is
completed on each sample:
1. PUL-QC Pulverizing QC Test
2. CRU-31 Fine crushing – 70% <2mm
Infini Expands Strategic Footprint at Portland Creek by 68%
Infini Resources Limited ABN 77 656 098 583 www.infiniresources.com.au
InfiniResources
9
Criteria JORC Code explanation Commentary
• Quality control procedures adopted for all sub-sampling
stages to maximise representivity of samples.
• Measures taken to ensure that the sampling is
representative of the in situ material collected, including for
instance results for field duplicate/second-half sampling.
• Whether sample sizes are appropriate to the grain size of
the material being sampled.
3. SPL-21 Split sample – riffle splitter
4. PUL-31 Pulverize up to 250g 85% <75 µm
• Analysis is completed using ME-MS61L, with selective ME-
MS61L for Pb isotopes.
• ALS Global was the lab selected for analytical work.
Quality of
assay data
and laboratory
tests
• The nature, quality and appropriateness of the assaying
and laboratory procedures used and whether the technique
is considered partial or total.
• For geophysical tools, spectrometers, handheld XRF
instruments, etc., the parameters used in determining the
analysis including instrument make and model, reading
times, calibrations factors applied and their derivation, etc.
• Nature of quality control procedures adopted (e.g.
standards, blanks, duplicates, external laboratory checks)
and whether acceptable levels of accuracy (i.e. lack of bias)
and precision have been established.
• At the start of each day the pXRF is calibration checked
and both a silica blank (blank) and uranium certified
reference material analysed (CRM). Blanks and CRMs are
inserted every 30 samples, and a calibration check is
completed.
• Blanks and certified reference materials are inserted every
30 samples, respectively. QAQC samples are reviewed for
contamination or failure, defined as 3x SDV of the
reference material with is ISO certified.
• Samples of core from the drilling program are submitted to
ALS Global for trace element assays, in line with ALS
Global’s QA/QC processes.
Verification of
sampling and
assaying
• The verification of significant intersections by either
independent or alternative company personnel.
• The use of twinned holes.
• Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic)
protocols.
• Discuss any adjustment to assay data.
• Verification of encountered intersections is conducted by
Infini Resources’ Exploration Manager.
• Data collected is completed using a logging program MX
Deposit. Logs are uploaded each evening and stored on a
cloud server. Internal data checks and quality control are
built into the logging software to ensure no gaps or incorrect
coding was used.
• pXRF measurements are taken to indicate any uranium
mineralisation from a spot sample as an indicator only with
core assays confirming the true amount of any uranium
mineralisation.
Infini Expands Strategic Footprint at Portland Creek by 68%
Infini Resources Limited ABN 77 656 098 583 www.infiniresources.com.au
InfiniResources
10
Criteria JORC Code explanation Commentary
Location of
data points
• Accuracy and quality of surveys used to locate drill holes
(collar and down-hole surveys), trenches, mine workings
and other locations used in Mineral Resource estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
• All drillhole and sample co-ordinates relate to NAD83 UTM
Zone 21N.
• Collar and soil sample locations are surveyed using
handheld GPS.
• LIDAR data flown by Infini are used to establish collar RL
Data spacing
and
distribution
• Data spacing for reporting of Exploration Results.
• Whether the data spacing and distribution is sufficient to
establish the degree of geological and grade continuity
appropriate for the Mineral Resource and Ore Reserve
estimation procedure(s) and classifications applied.
• Whether sample compositing has been applied.
• Soil sample spacing is considered appropriate at this stage
of exploration
• Drillhole collar spacing is designed to intersect the source
of anomalous uranium in soil and not determine a resource
estimate.
• Not applicable as no Mineral Resource and Ore Reserves
are reported.
• No sample compositing has been applied.
Orientation of
data in relation
to geological
structure
• Whether the orientation of sampling achieves unbiased
sampling of possible structures and the extent to which this
is known, considering the deposit type.
• If the relationship between the drilling orientation and the
orientation of key mineralised structures is considered to
have introduced a sampling bias, this should be assessed
and reported if material.
• Drilling has been oriented perpendicular to the interpreted
geological structures inferred from UAV magnetics.
• Relationship between drilling orientation and mineralised
structures is currently unknown.
Sample
security
• The measures taken to ensure sample security. • NQ drill core Is transported by helicopter from the drill site to
the core logging facility. All drill core is logged, photographed
and the altered intervals are tagged for sampling. The core
is then split. Groups of samples are sealed in large bags with
lab security tags attached to maintain a chain of custody.
Samples are stored in a locked facility and shipped using a
bonded courier. All sample preparation and analysis will be
performed by ALS Laboratories in Vancouver, BC.
Audits or
reviews
• The results of any audits or reviews of sampling techniques
and data.
• None carried out to date.
Infini Expands Strategic Footprint at Portland Creek by 68%
Infini Resources Limited ABN 77 656 098 583 www.infiniresources.com.au
InfiniResources
11
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria JORC Code explanation Commentary
Mineral
tenement and
land tenure
status
• Type, reference name/number, location and ownership
including agreements or material issues with third parties
such as joint ventures, partnerships, overriding royalties,
native title interests, historical sites, wilderness or national
park and environmental settings.
• The security of the tenure held at the time of reporting along
with any known impediments to obtaining a licence to
operate in the area.
• The Falls Lake prospect is located on 036683M and
036684M.
• The Portland Creek uranium project comprises eleven
mineral claims (036683M, 036684M, 036685M, 037492M,
037490M, 037496M. 037495M, 039752M, 039753M,
039754M & 039755M). The company staked the project in
2023/24 and in 2025 (100% ownership) and is not aware of
any royalties existing on the claims or impediments to
obtaining a license to operate in the area.
• The claims are currently live and in good standing.
Exploration
done by other
parties
• Acknowledgment and appraisal of exploration by other
parties.
• Exploration between 1976 and 1980 was carried out by the
Conwest Canadian Uranium Exploration JV. Work included
radon gas (Track Etch) sampling, a ground scintillometer
survey, and VLF-EM and ground magnetic surveys. Follow-
up drilling using a portable “Pionjar” drill capable of drilling
to 8 m depth identified a small, high grade uranium anomaly
(so-called “loam deposit”). Only very sparse details survive
on this drilling program with no assay results or location
data. Five diamond holes were drilled. Partial results have
been found for only one of these, which reported
unmineralised granite.
• Subsequent exploration in 2007 included an airborne
IMPULSE EM, magnetic and radiometric survey flown on
behalf of Ucore Uranium Inc. and collection of 8 rock
samples. The property was abandoned shortly after.
Geology • Deposit type, geological setting and style of mineralisation. • The target uranium deposit type is likely to be shear-zone
hosted (albitite-type) hosted in altered granite.
Infini Expands Strategic Footprint at Portland Creek by 68%
Infini Resources Limited ABN 77 656 098 583 www.infiniresources.com.au
InfiniResources
12
Criteria JORC Code explanation Commentary
Drill hole
Information
• A summary of all information material to the understanding
of the exploration results including a tabulation of the
following information for all Material drill holes:
• easting and northing of the drill hole collar
• elevation or RL (Reduced Level – elevation above sea level
in metres) of the drill hole collar
• dip and azimuth of the hole
• down hole length and interception depth
• hole length.
• If the exclusion of this information is justified on the basis
that the information is not Material and this exclusion does
not detract from the understanding of the report, the
Competent Person should clearly explain why this is the
case.
• Locations and results of most holes drilled by the Conwest
JV are unknown. The limited historical exploration records
are publicly available in the Government of Newfoundland
and Labrador’s GeoScience OnLine system under the
report IDs: 012I/03/0125 and NFLD/3082.
• All drill hole collar locations and mineralised intercepts have
been reported in this report for all holes completed to date.
• No relevant data has been excluded from this report.
• Drill hole details:
Hole
UTM
East
UTM
North
UTM
Elevation
(m)
Azi-
muth
Dip
Length
(m)
PCDD
25-007
470752 5559564 131 160 -45 130
PCDD
25-008
470730 5559405 128 320 -45 200
PCDD
25-
009A
470740 5559787 132 184 -45 317
PCDD
25-010
470290 5557910 123 170 -45 263
PCDD
25-
011A
470290 5557910 123 170 -65 161
PCDD
25-012
470459 5557965 123 170 -45 350
Data
aggregation
methods
• In reporting Exploration Results, weighting averaging
techniques, maximum and/or minimum grade truncations
(eg cutting of high grades) and cut-off grades are usually
Material and should be stated.
• No aggregation methods have been used as assay data
not yet received.
Infini Expands Strategic Footprint at Portland Creek by 68%
Infini Resources Limited ABN 77 656 098 583 www.infiniresources.com.au
InfiniResources
13
Criteria JORC Code explanation Commentary
• Where aggregate intercepts incorporate short lengths of
high grade results and longer lengths of low grade results,
the procedure used for such aggregation should be stated
and some typical examples of such aggregations should be
shown in detail.
• The assumptions used for any reporting of metal equivalent
values should be clearly stated.
Relationship
between
mineralisation
widths and
intercept
lengths
• These relationships are particularly important in the
reporting of Exploration Results.
• If the geometry of the mineralisation with respect to the drill
hole angle is known, its nature should be reported.
• If it is not known and only the down hole lengths are
reported, there should be a clear statement to this effect (eg
‘down hole length, true width not known’).
• Only downhole lengths are reported.
• Insufficient intersections have been made thus far to
establish a relationship between mineralisation widths and
intercept lengths.
• Geometry of target mineralisation has not been verified.
Diagrams • Appropriate maps and sections (with scales) and tabulations
of intercepts should be included for any significant discovery
being reported These should include, but not be limited to a
plan view of drill hole collar locations and appropriate
sectional views.
• Appropriate diagrams are included in the main body of this
report. No significant discovery is being reported.
Balanced
reporting
• Where compreh
Share your feedback
Discover